Table of Contents
Advertisement
Brightness button [ ]
Adjust buttons [
]
Enter button [ ]
/ SOURCE button
AUTO button
Power button [ ]
Power indicator
Remote Control Sensor
See
PowerSaver
described in the manual for further information regarding power saving
functions. For energy conservation, turn your monitor OFF when it is not needed, or
when leaving it unattended for long periods.
Rear
The configuration at the back of the monitor may vary from product to product.
POWER IN port
VGA IN port
VGA OUT port
Kensington Lock
5) Sport
For watching motion pictures such as a sport.
6) Movie
For watching motion pictures such as a DVD or Video CD.
>> Click here to see an animation clip
When OSD is not on the screen, push the button to adjust brightness.
>> Click here to see an animation clip
Adjust items in the menu.
Activates a highlighted menu item. /
Push the 'SOURCE', then selects the video signal while the OSD is
off.
(When the SOURCE button is pressed to change the input mode, a
message appears in the upper left of the screen displaying the current
mode -- Analog or MagicNet input signal.)
Use this button for auto adjustment.
>> Click here to see an animation clip
Use this button for turn the monitor on and off.
This light glows green during normal operation, and blinks green once
as the monitor saves your adjustments.
Aim the remote control towards this spot on the Monitor.
Connect the power cord for your monitor to the power port on the back of
the monitor.
Connect the signal cable to the 15-pin, D-sub port on the back of your
monitor.
Connect a monitor to another monitor through a D-Sub cable.
The Kensington lock is a device used to physically fix the system when
using it in a public place.
The locking device has to be purchased
separately.
For using a locking device, contact where
you purchase it.
Advertisement
Table of Contents
