Back to Contents Page
Setup: HP w19 LCD Monitor
•
Base
•
Attaching the Cables
•
Attaching Wall Mounting Arm
Back to Contents Page
Base: HP w19 LCD Monitor
Base
•
Attaching the Base
Base
•
For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your
own preference.
•
Hold the stand so you do not topple the monitor when you change the monitor's angle.
•
You are able to adjust the monitor's angle.
NOTE:
•
Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
•
Careful attention is required not to catch your fingers or hands when you change the angle.
•
The color of the cabinet may vary.
•
Outline for reference only.
•
Removing the Base