Advertisement
BIOS Setting Password
Use this menu to set BIOS setting Password.
Save & Exit Setup
Save changes to CMOS and exit setup.
Exit Without Saving
Abandon all changes and exit setup.
Current FSB Clock
It shows the current FSB clock of . Read-only.
Adjust CPU Ratio
This item allows you to adjust the CPU ratio. Setting range is from [8] to [50].
Auto Detect DIMM/PCI Clock
This item is used to auto detect the DIMM and PCI slots. When set to [Enabled],
the system will remove (turn off) clocks from empty DIMM and PCI slots to
minimize the electromagnetic interference (EMI).
Spread Spectrum
When the motherboard's clock generator pulses, the extreme values (spikes) of the
pulses creates EMI (Electromagnetic Interference). The Spread Spectrum function
reduces the EMIgenerated by modulating the pulses so that the spikes of the pulses
are reduced to flatter curvIf you do not have any EMI problem, leave the setting at
Disabled for optimal system stability and performance. But if you are plagued by
EMI, set to Enabled for EMI reduction. Remember to disable Spread Spectrum if
you are overclocking because even a slight jitter can introduce a temporary boost
in clock speed which may just cause your overclocked processor to lock up.
Advertisement
