Advertisement
MP3 LINK
iPod touch(1G,2G,3G,4G)
iPhone, iPhone 3G, iPhone 3G
iPhone(4,4S)
iPod nano 1G
iPod nano 2G
iPod nano 3G
iPod nano 4G
iPod nano(5G,6G)
iPod classic
To get the detailed instructions for use, visit
www.philips.com/support.
00:00:03
EN
1
Important
•
Read these instructions.
•
Heed all warnings.
•
Follow all instructions.
•
Do not use this apparatus near water.
•
Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
•
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
•
Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
•
Only use attachments/accessories specified by the manufacturer.
•
Unplug this apparatus during lightning storms or when unused for long periods of time.
•
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
•
Apparatus shall not be exposed to dripping or splashing.
•
Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted
candles).
•
Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the
disconnect device shall remain readily operable.
Warning
•
Never remove the casing of this apparatus.
•
Never place this apparatus on other electrical equipment.
•
Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the apparatus from the
power.
2
Notice
Any changes or modifications made to this device that are not expressly approved by Philips
Consumer Lifestyle may void the user's authority to operate the equipment.
"Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to
connect specifically to iPod or iPhone respectively, and has been certified by the developer to
meet Apple performance standards. Apple is not responsible for the operation of this device or
its compliance with safety and regulatory standards. Please note that the use of this accessory
with iPod or iPhone may affect wireless performance.
iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
This product complies with the radio interference requirements of the European Community.
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means
that the product is covered by the European Directive 2002/96/EC.
Please inform yourself about the local separate collection system for electrical
and electronic products.
Please act according to your local rules and do not dispose of your old products
with your normal household waste. Correct disposal of your old product helps
to prevent potential negative consequences for the environment and human
health.
3
Specifications
Amplifier
Rated Output Power
10W per channel x 2
Bluetooth
Standard
Bluetooth Standard Version 2.1+EDR
Frequency Band
2.402~2.480 GHzISM Band
Range
10 m (free space)
Speaker
Speaker Impedance
4 ohm
Speaker Driver
2.5"
General information
AC Power
Model: AS190-100-AI180 (Philips);
Input: 100-240 V ~, 50/60Hz, 0.7A;
Output: 10 V
1.8 A
Operation Power Consumption
15 W
Standby Power Consumption
< 1 W
Max. load for iPod/iPhone
5 V
1 A
Dimensions
- Main Unit (W x H x D)
290 x 159 x 113 mm
Weight
- Main Unit
1.5 kg
4
Troubleshooting
Warning
•
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the following points before
requesting service. If the problem remains unsolved, go to the Philips web site (www.philips.com/
support). When you contact Philips, ensure that the apparatus is nearby and the model number
and serial number are available.
No power
•
Ensure that the AC power adaptor of the unit is connected properly.
•
Ensure that there is power at the AC outlet.
No sound
•
Adjust the volume.
No response from the unit
•
Disconnect and reconnect the AC power adaptor, then turn on the unit again.
About Bluetooth device
Music playback is unavailable on the system even after successful Bluetooth connection.
•
The device cannot be used with the system to play music.
The audio quality is poor after connection with a Bluetooth-enabled device.
•
The Bluetooth reception is poor. Move the device closer to the system or remove any
obstacle between the device and the system.
Cannot connect with the system.
•
The device does not support the profiles required for the system.
•
The Bluetooth function of the device is not enabled. Refer to the user manual of the
device for how to enable the function.
•
The system is not in the pairing mode.
•
The system is already connected with another Bluetooth-enabled device. Disconnect that
device or all other connected devices and then try again.
The paired device connects and disconnects constantly.
•
The Bluetooth reception is poor. Move the device closer to the system or remove any
obstacle between the device and the system.
•
For some devices, the Bluetooth connection may be deactivated automatically as a power-
saving feature. This does not indicate any malfunction of the system.
Advertisement
