Advertisement
Installation
We would recommend that the installation of this equipment is carried out by a
qualified electrician, who has a full understanding of industrial switching
applications.
It is the users responsibility to provide adequate protection for the intended motor
and to ensure that the supply and cabling is of sufficient capacity to enable the
motor to start without causing undue supply disturbances due to a voltage drop.
Before installing this equipment, careful consideration must be given to the location
in which it is to be used, also what machinery it is intended to run, such as drills,
lathes, milling machines, circular saws etc.
WARNING
THESE CONVERTERS ARE NOT SUITABLE FOR USE WITH CAR
HOISTS, COMPRESSORS & VACUUM PUMPS DUE TO THEIR
HIGH START UP LOADS.
Once the location has been established, the installation may be carried out as
follows on page 5.
5
Hide quick links:
Advertisement
Need help?
Do you have a question about the PC20 and is the answer not in the manual?
Questions and answers