Using The Battery; Removing And Attaching Battery - Samsung Q1 User Manual

Using the Battery

Please refer to the following instructions when running the computer on battery power, without connecting
the AC power. A Lithium-Ion smart battery is supplied with this computer.
Before You Start!
Carefully read and follow the precautions printed on the battery before using the battery.
Precautions
•
Use only charges specified in the user's guide.
•
Never heat the battery pack, put it near or in a fire or use at a temperature higher than
60°C, as this may cause fire.
•
Never cause a short circuit between the battery pack terminals or disassemble the battery
pack.
•
Carefully read and follow the precautions printed on the battery and the safety instructions in
the user's guide before using the battery.
•
Please refer to the system operation environment of this manual and operate and the store
the battery at room temperature. (

Removing and Attaching Battery

1
Shutdown the system and place the computer upside down on a flat surface.
2
Pull the two battery latches outwards (
3
To install the battery again, slide the battery into the system. The battery latches move inwards
and fix the battery automatically.
Check if the battery latch has been moved inwards.
p.138)
), then remove the battery.
Battery latch

Using the Battery 107