Pride CL15KD Owner's Manual page 10

LIFT CHAIR SERIES
Removable Back Pad: Attaches to the lift chair
with reusable fasteners to enable the use of the
bed option on some models and to make servic-
ing the chair more convenient.
Removable Chaise Pad: Attaches to the lift
chair with reusable fasteners to make servicing
the chair more convenient.
NOTE: The lift chair must be in the recline
position in order to remove or attach the
back pad, chaise pad, or bed option mattress.
NOTE: The LL670 bed option consists of a
mattress, bedsheet, strap, and storage bag.
After removing the mattress, it is recom-
mended that you store it in the bag provided.
NOTE: If your lift chair is equipped with a removable back and/or chaise pad and has the heat
and/or massage option, disconnect the heat and/or massage cords from the junction box, then
remove the back pad and/or chaise pad. Refer to Appendix "C" for the heat and massage elec-
trical diagram.
Footrest Extension: Provides 3 in. (8 cm) of extension to the footrest, increasing the leg support for taller
individuals when the chair is in the recline position (Fig. 3.2). This feature is specific to the LL575 Lift Chair
and optional to the LL570 Lift Chair.
NOTE: The footrest extension folds up neatly and is not visible when the chair is in the seated
and lift positions.
Lift Mechanism: Responds to the hand control commands to position the chair in the sit and stand positions.
Leg Levelers: Manually rotate up or down in order to stabilize the chair before use (Fig. 3.3).
Figure 3.3 Leg Levelers
10
ROTATE THE LEG LEVELERS TO RAISE OR LOWER THE CHAIR.
www.pridemobility.com
Figure 3.2 Footrest Extension
III. YOUR LIFT CHAIR
FOOTREST EXTENSION
(PINCH POINT)
Lift Chair Series