Viega Basic Heating Control Installation Manual page 29

Application
T200 series thermostats provide temperature control
on a variety of heating, cooling and single stage heat
pump applications.
The large LCD window displays room temperature
including degree increments indicated by a series of
dashes. The system heat output cycles on a 1 or 2F
degree field selectable differential. The cool output
differential is fixed at 2F degrees. The setpoint is
displayed and changed by pressing one of the setpoint
buttons up or down. Installation is simplified by having
all of the field wires mounted to the separate wall plate.
This is a powered thermostat, which must receive
75 mA of power at all times.
Features
•
LCD window display
•
Jumper selectable 5 minute time delay for heating
and cooling applications
•
Mechanical contact for 40
(optional)
Printed in U.S.A. 5/10
°
F limit freeze protection
© Copyright 2010 Schneider Electric All Rights Reserved.
T200 Series
Digital, On/Off Thermostat
General Instructions
T200 Series
F-27027-5