TP-Link TL-WN823N Quick Installation Manual page 2

1
Connect to a Computer
Insert the adapter into a USB port on your
computer directly.
For Windows
Note:
In Windows XP, a Found New Hardware Wizard
window will appear when the adapter is detected.
Please click Cancel.
2 3
Install Driver and WPS Tool Join a Wireless Network
a. Insert the CD and run the Autorun.exe. Option 1:
Note:
You can also download the driver from this product's
a. Click the network icon (
Support page at www.tp-link.com.
taskbar.
b. Select TL-WN823N and follow the
b. Select your Wi-Fi network, click Connect
steps to install the driver and WPS Tool.
and enter the password when prompted.
Note:
If you can't install the driver successfully, disable the
antivirus software and firewall, then try again.
TL-WN823N
Via Windows Wireless Utility Option 2: Via WPS Tool
or ) on the a. Press the WPS button on your router.
b. Within 2 minutes, press and hold the WPS
button on the adapter until WPS Tool opens.
Connections are available
Wireless Network Connection
TP-Link_XXXX
Connect automatically Connect
√
c. When the "Success!" message appears, your
computer is connected to Wi-Fi.
WPS
Cancel
WPS For detailed instructions, please refer to the
Cancel
User Manual from this product's Support
page at www.tp-link.com.
For technical support and other information,
please visit http://www.tp-link.com/support,
or simply scan the QR code.
This USB Adapter can only be powered by computers that comply
with Limited Power Source (LPS). ©2017 TP-Link