How To Identify Parts Of Vacuum Cleaner; Maintenance Schedule - Eureka AS1092A Owner's Manual

How to identify parts of vacuum cleaner

Air path
selector knob
Power cord
Cord reel
Height
adjustment knob
Maintenance Schedule is also located on back side of dust cup.
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Power switch is marked
Washable filter
DCF-25
Exhaust filter
EF6
( HEPA filter
on some models)
Brush roll
2 Eureka Customer Service HELPLINE 1-800-282-2886
SPECIAL FEATURES
Available on some models
Handle
Turbo nozzle
(on some models)
Dust cup release
Filter assembly
WAND
2 2
(located inside dust cup)
Wand 2
Dust cup
Exhaust/HEPA
filter compartment
(located behind dust cup)
Brushroll on/off pedal
Brush roll cover

Maintenance schedule

Turbo
nozzle
Turbo cover
Crevice tool
Dusting brush
Cord rewind switch
Power switch
Handle release
Press lever to release bottom lid.
Debris will empty.
Washable dust cup filter DCF25 Clean
Pull filter latch to release dust cup cover. Lift out
cup filter. Wash filter; allow to air dry thoroughly.
Filter
assembly
Align tabs on filter tube, screen and cup;
drop into position. Reinstall cup filter.
EXHAUST FILTER EF6 – Check filter regularly. Replace every
6-12 months or when performance loss is noticeably declining
W belt
Remove dust cup. Press down tab and
W BELT – Replace worn, cut or out of shape belt
Hose
DUST CUP – Empty after each use
Close bottom lid
until it clicks.
as needed to maintain suction.
Lift out filter tube and screen. Shake off
dust. Rinse; dry thoroughly.
Filters and screen must be in
place for cover to lock.
Lift out filter and replace. Reinstall
remove filter cover. cover and snap into place.
BRUSH ROLL – Clean monthly
www.eureka.com
Cord clip
Carry handle
Wand
Lower hose retainer
Base hose
I
for On/Off.
Close cover.