Step 5: Adding Effects - Behringer EUROPORT PPA2000BT Quick Start Manual

Step 5: Adding Effects

1,Set the FX [LEVEL] knob on the DIGITAL EFFECTS PROCESSOR to approximately a
75% setting.
Scroll through the available effects by turning the PROGRAM [PUSH] knob.
2,
The number in the display will flash.
Press the PROGRAM [PUSH] knob to select the effect. The number will stop flashing.
3,
While speaking, singing, or playing, turn the channel FX knob up to the desired level
4,
on each channel to which you wish to add effects.