Keystone KSTAD70C Instruction Manual page 8

Operation
Filter button
Filter
The check filter feature is a reminder to clean the
Air Filter for more efficient operation. The Filter
light(Clean filter light) will illuminate after 250 hours
of operation. To reset after cleaning the filter, press
the Filter button and the light will go off.
Continue button
Cont.
Press to activate the continuous dehumidifying
operation.
Filter
Filter
Full
Cont.
Cont.
On
Timer
Fan
Turbo
Normal
Auto defrost
Off
Down/Up buttons
—
Humidity Set Control Buttons
+
The humidity level can be set within a range of
35%RH(Relative Humidity) to 85%RH(Relative
Humidity) in 5% increments.
For drier air, press the
percent value(%).
For damper air, press the
percent value(%).
Timer Set Control Buttons
Press to initiate the Auto start and Auto stop feature,
in conjuction with the
7
button and set to a lower
button and set a higher
and buttons.