Download Print this page

Advertisement

Quick Links

Manual For WDG720M
SAMSUNG ELECTRONICS CO., Ltd.
Wi-Fi module(2.4GHz, 5GHz, a/b/g/n)
- Model name : WDG720M
- Operation Temperature : -10℃ ~ +70℃
- Power : +5V ±5% (+4.75V ~ +5.25V)
1. Introduction
WDG720M is a USB embedded module compliant with IEEE802.11n standard.
Thecore chipset is from MTK, part number is RT3572L.
2. Operational Description
WDG720M is the 802.11a/b/g/n RF Module, that acts as a communication hub for users of a
wirelessdevice to connect to a wired LAN.
MIMO type
Product type: WLAN
Time base of the transmission frequency
For IF and RF frequency, Crystal is a clock reference.
Synthesizer
Synthesizer inside Transceiver. Internal voltage controlled oscillator (VCO) provides the desired
LOsignal base on the phase-locked loop (PLL) with a relatively wide tuning range for this
application.
Transmission
Base-band Processing (BBP) IC has DSSS (BPSK/QPSK/CCK) and OFDM
(BPSK/QPSK/16QAM/64QAM) modulation function, it provides transmission data rate are 1, 2,
5.5, 11Mbps on DSSS and 6, 12, 18, 24, 36, 48, 54 Mbps on OFDM. Digital data signal will be
converted toanalog (TX IQ) signals through DAC in
filter. TX I/Q signaluse direct conversion (zero-IF) architecture converter to generate carrier
frequency signal. TransceiverIC and internal PA magnify output power.
(11b mode:
1TX, 1RX,
11g mode:
1TX, 1RX,
BBP
IC, TX IQ pass through to low pass
11n mode:
2TX, 2RX)

Advertisement

loading

Summary of Contents for Samsung WDG720M

  • Page 1 WDG720M is a USB embedded module compliant with IEEE802.11n standard. Thecore chipset is from MTK, part number is RT3572L. 2. Operational Description WDG720M is the 802.11a/b/g/n RF Module, that acts as a communication hub for users of a wirelessdevice to connect to a wired LAN. MIMO type...
  • Page 2 Receiver Reverse direction isolation of LNA inside Transceiver IC suppresses unwanted radiation. Then RFsignal will bedirectly down to IF signal (RX IQ) and high frequency spurious emissions are suppressed by LPF. Atlast RX IQ signal will be demodulated digital data. Base band Processing 1.
  • Page 3 The host device must be labeled to display the Industry Canada certification number of the module. Contains transmitter module IC:649E-WDG720M Le dispositif d'accueil doivent être étiquetés pour afficher le numéro de certification d'Industrie Canada du module. Contient module émetteur IC :649E-WDG720M...
  • Page 4: User Information

    IMPORTANT NOTE This device complies with FCC & IC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and must not be co-located or operating in conjunction with any other antenna or transmitter. This device is intended only for OEM integrators under the following conditions: 1) This module may not be co-located with any other transmitters or antennas.