Front Frame - Samsung SyncMaster 460DR-S User Manual

1. A:HOLDER-CAP
3. Make sure that two people are work-
ing together to remove the COVER

FRONT FRAME.

Note
The assembly of the product is in the reverse order of the removal.
Terms
Dot Pitch
Vertical Frequency
Horizontal Frequency
Interlace and Non-Interlace
Methods
Appendix
2.Remove the four (4) scrow pins using
a coin.
4. Clean the inside of the FRAME with
a soft cloth.
The image on a monitor is composed of red, green and blue
dots. The closer the dots, the higher the resolution. The dis-
tance between two dots of the same color is called the 'Dot
Pitch'. Unit: mm
The screen must be redrawn several times per second in
order to create and display an image for the user. The fre-
quency of this repetition per second is called the Vertical
Frequency or Refresh Rate. Unit: Hz
Example: If the same light repeats itself 60 times per sec-
ond, this is regarded as 60 Hz.
The time to scan one line connecting the right edge to the
left edge of the screen horizontally is called the Horizontal
Cycle. The inverse number of the Horizontal Cycle is called
Horizontal Frequency. Unit: kHz
Showing the horizontal lines of the screen from the top to
the bottom sequentially is called the Non-Interlace method
while showing odd lines and then even lines in turn is called
the Interlace method. The Non-Interlace method is used for
the majority of monitors to ensure a clear image. The Inter-
lace method is the same as that used in TVs.