Samsung 400Pn, 400P Owner's Manual page 87

those devices in a small window super-imposed on the PC
Video signal. (Off/On)
1) PIP
- The direct button on the remote control is 'PIP' button.
Off
On
: Turn the PIP Screen on or off.
2) Source
- The direct button on the remote control is 'SOURCE'
button.
PC / DVI
: AV / S-Video / Component Mode
BNC
: AV / S-Video Mode
AV / S-Video
: PC / BNC / DVI Mode
Component
: PC / DVI Mode
: Select the input source for the PIP.
3) Swap
- The direct button on the remote control is 'SWAP' button.
: Swapping the contents of the PIP and main image.
The image in the PIP window will appear on the main
screen, and the main screen image will appear in the PIP
window.
4) Size
- The direct button on the remote control is 'SIZE' button.
: Change the Size of the PIP window.
If you select
will not be activated.
5) Position
: Change the Position of the PIP window.
6) Transparency
High
Medium
Low
Opaque
: Adjust the Transparency of PIP windows.
Available Mode : PIP
Name the input device connected to the input jacks to make
Edit Name
your input source selection easier.
1) PC
2) BNC
3) DVI
4) AV
5) S-Video
6) Component
More than one PIP couldn't be overlapped on
screen as BNC and the component use the same
terminal.
, , in Size, Position and Transparency
MagicNet couldn't be renamed.
1) PIP
2) Source
3) Swap
4) Size
5) Position
6) Transparency