Safety Instructions Before connecting the AC power cord to an outlet, make sure the voltage designation on your monitor corresponds to the local electrical supply. Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock. To avoid electric shock, never touch the inside of the monitor.
Connecting Your Monitor Turn off your computer and unplug the power cord. Signal cable Connect the end of the signal cable to your computer’s video port. If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the pins on your adapter (adapter not included).
Monitor Control Buttons Press the desired control button once. (Some controls require that two buttons be pressed simultaneously.) See the following tables for descriptions of button functions. Use the adjustment buttons (+, –) to increase or decrease the adjustment. The power indicator light blinks rapidly when a maximum setting is reached.
Page 6
Buttons Control Press both & Hold for 3 seconds Parallelogram Skews screen image. – skews to left + skews to right V-linearity Compression of image on screen. – compresses bottom of screen + compresses top of screen Pinbalance Curves of vertical lines. –...
Troubleshooting Before calling for service, check the information in this section to see if you can solve the problem yourself. If you do need assistance, please call the phone number on the warranty card, the phone number on the back cover of this manual, or contact your dealer. There is no screen image.