Samsung SyncMaster 226NW User Manual page 14

Adjust buttons [ ]
Enter button [ ] /
SOURCE button
AUTO button
Power button [ ]
Power indicator
See PowerSaver described in the manual for further information regarding power saving
functions. For energy conservation, turn your monitor OFF when it is not needed, or
when leaving it unattended for long periods.
Rear
The configuration at the back of the monitor may vary from product to product.
POWER port
RGB IN port
Kensington Lock
See Connecting Cables
>> Click here to see an animation clip
Adjust items in the menu.
Activates a highlighted menu item.
The [Source/Enter] button operates in [analog] mode only and is only
used for selecting an OSD menu.
Use this button for auto adjustment.
>> Click here to see an animation clip
Use this button for turning the monitor on and off.
This light glows blue during normal operation, and blinking blue once
as the monitor saves your adjustments.
Connect the power cord for your monitor to the power port on the back of
the monitor.
Connect the signal cable to the 15-pin, D-sub port on the back of your
monitor.
The Kensington lock is a device used to physically fix the system when
using it in a public place.
The locking device has to be purchased separately.
For using a locking device, contact where you purchase it.
for further information regarding cable connections.