Table of Contents
Advertisement
Sort
It's used to exchange the numbers of two channels.
Name
If channel name information is broadcast when you store the channels either
manually or automatically, the names are assigned to the channels directly.
You can however change these names or assign new names as required.
Fine Tune Due to weak signals or an incorrect antenna configuration, some of the
channels may not be tuned correctly.
Setup
Available Mode
: PC / DVI
The default setting may be different depending on the selected Input Mode (input signal
SOURCE selected in External Input List) and the selected resolution.
OSD
Description
You can choose one of 8 languages.
Language
Note : The language chosen affects only the language of the OSD.
It has no effect on any software running on the computer.
Turns the monitor off after a pre-determined period of time.
Sleep Timer
1) Off
- The direct button on the remote control is the 'SLEEP' button.
Transparency Changes the opaqueness of the background of the OSD.
1) High
2) Medium
3) Low
4) Opaque
If no signal is being received or the signal is very weak, a blue screen
Blue Screen
automatically replaces the noisy picture background. If you wish to continue
viewing the poor picture, you must set the "Blue screen" mode to "Off".
: TV
: Ext.
2) 30
3) 60
4) 90
5) 120
: AV
: S-Video
: Component
6) 150
7) 180
: HDMI
Play / Stop
Hide quick links:
Advertisement
Table of Contents
