Microsoft ® Windows ® 2000 Operating System; How To Install; Microsoft ® Windows ® Millennium Operating System - Samsung SyncMaster 225BW User Manual

10. Monitor driver installation is completed.
®
Microsoft Windows
When you can see "Digital Signature Not Found" on your monitor, follow these steps.
1. Choose the " OK " button on the " Insert disk " window.
2. Click the " Browse " button on the " File Needed " window.
3. Choose A:(D:\Driver) then click the "Open" button and then click " OK " button.

How to install

1. Click " Start ," " Setting ," and then " Control Panel ."
2. Double click the " Display " icon.
3. Choose the " Settings " tab and then click " Advanced ."
4. Choose " Monitor ."
Case1: If the "Properties" button is inactive, it means your monitor is properly configured.
Please stop installation
Case2: If the "Properties" button is active, click the "Properties" button then follow next steps
continually.
5. Click " Driver " and then click " Update Driver " then click the "Next" button.
6. Choose " Display a list of the known drivers for this device so that I can choose a
specific driver " then click " Next " and then click " Have disk ."
7. Click the " Browse " button then choose A:(D:\Driver).
8. Click the " Open " button, then click " OK " button.
9. Choose your monitor model and click the " Next " button then click " Next " button.
10. Click the " Finish " button then the " Close " button.
If you can see the " Digital Signature Not Found " window then click the " Yes "button.
And click the " Finish " button then the " Close " button.
®
Microsoft Windows
1. Click " Start ," " Setting " and then " Control Panel ."
2. Double click " Display " icon.
3. Select the " Settings " tab and click the " Advanced Properties " button.
4. Select the " Monitor " tab.
5. Click the " Change " button in the " Monitor Type " area.
6. Choose " Specify the location of the driver ."
7. Choose " Display a list of all the driver in a specific location. " then click the " Next " button.
8. Click the " Have Disk " button
9. Specify A:\(D:\driver) then click " OK " button.
10. Select " Show all devices " and choose the monitor that corresponds to the one you
connected to your computer and click " OK ."
11. Continue choosing " Close " button and " OK " button until you close the Display Properties
dialogue box.
®
Microsoft Windows
1. Click Start , Settings , Control Panel , and then double-click the Display icon.
2. In the Display Registration Information window, click the Settings tab and then click All
Display Modes .
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency)
and then click OK .
4. Click the Apply button if you see the screen working normally after clicking Test . If the
screen is not normal, change to a different mode (lower mode of resolution, colors, or
frequency).
®
2000 Operating System
®
Millennium Operating System
®
NT Operating System