Advertisement
Advertisement
Table of Contents
Related Manuals for Curtech CT-K80
Summary of Contents for Curtech CT-K80
- Page 1 FOLDING SOLAR PANEL KIT USER MANUAL Handle Battery Lead Cable Latches Battery Clips Aluminium Frame 10. Anderson Plugs Strong Support Legs 11. Protective Corners LCD Solar Charge Controller 12. Storage Carry Bag Junction Box 13. Inline Fuse Specification Label...
- Page 2 Installation Remove the solar panel kit from the handy carry bag. Unclip the two latches on the side of the unit and fold two panels outward. Loosen the wing nut to each leg and fully extend the two legs then tighten the wing nut to each leg to lock the legs into position to gain maximum support.
-
Page 3: Troubleshooting
Frequently Asked Questions Q. What type of batteries can be used with the kit? A. Factory set for AGM Batteries, but will charge Gel, Flood and Calcium Batteries too. Q. Can I bypass the regulator to charge my battery? A. ONLY when the kit is connected to the battery via another solar charge controller. A battery should never be charged direct to any battery without a solar controller being used. - Page 4 Battery Reverse Polarity Full protection against battery reverse polarity, no damage to the controller will result. An error code 602 will display on the LCD screen. This code indicates the positive and negative connections to your battery are the wrong way around. Disconnect the wires from the battery and reconnect making sure the positive lead is connected to the positive terminal on the battery and the negative lead is connected to the negative on the battery.
Need help?
Do you have a question about the CT-K80 and is the answer not in the manual?
Questions and answers