Table of Contents
Advertisement
Picture (Analog / Digital : DVI)
Menu
MagicBright™ is a new feature providing the optimum
viewing environment depending on the contents of the
image you are watching. Currently four different modes are
MagicBright
available: Text, Internet, Entertain and Custom. Each
mode has its own pre-configured brightness value.
You can easily select one of four settings by simply
pressing MagicBright [
You can use the on-screen menus to change the contrast
and brightness according to personal preference.
1) Contrast
Custom
2) Brightness
Image Lock is used to fine-tune and get the best image by
removing noise that creates unstable images with jitter and
shimmer. If satisfactory results are not obtained using the
Fine adjustment, use the Coarse adjustment and then use
Fine again.
- Available in Analog Mode Only
Image Lock
The values of Fine, Coarse, position are adjusted
automatically. If you change resolution in the control panel,
Auto Adjustment
Auto function will be executed.
- Available in Analog Mode Only
Description
] button.
: Adjust the Contrast.
: Adjust the Brightness.
1) Coarse
: Removes noise such as vertical stripes. Coarse
adjustment may move the screen image area. You
may relocate it to the center using the Horizontal
Control menu.
2) Fine
: Removes noise such as horizontal stripes. If the
noise persists even after Fine tuning, repeat it after
adjusting the frequency (clock speed).
3) Sharpness
: Adjust the Sharpness.
4) H-Position
: Adjusts the screen location horizontally.
5) V-Position
: Adjusts the screen location vertically.
Play/Stop
Contrast
Brightness
Coarse
Fine
Sharpness
H-Position
V-Position
Advertisement
Table of Contents
