Operating The Cd - Hyundai DIGITAL NAVIGATION SYSTEM User Manual

Operating the XM radio
Selecting channel by directly
inputting the channel number
1. Press the Search button. The
channel input screen will be
displayed.
2. Input desired channel number,
and press the OK button. The
previous screen will become
restored and the selected
channel will begin playing.
Storing XM preset
1. Select the desired channel.
2. Press the preset button for
over 0.8 second. The frequen-
cy will be saved along with a
beep sound.
Scanning XM broadcast
channel
1. Press the Scan button.
● Scan (under 0.8 second): Scans
all channels for 5 seconds each
if in channel mode. If in cate-
gory mode, scans all channels
within the current category for
5 seconds each.
Preset Scan (over 0.8 second):
●
Scans the 6 preset channels
within the current band for 5
seconds each.
12
2. Press the button again to continue
Scan
playing the channel. The scan will be ter-
minated and the current channel will con-
tinue to play.

Operating the CD

Listening to CD music
1. Insert the CD or press the
CD/AUX key on the control
panel if the CD is already insert-
ed.
2. Select the desired track.
Selecting the CD track
Selecting track through
search
1. Turn the TUNE knob on the
control panel in clockwise or
counter-clockwise direction.
TUNE
Each click on the knob
will display the information of
the next or previous track. The
current playing track will con-
tinue to play.
2. Press the TUNE knob at the
desired track. The searched
track will begin playing.
Selecting through Track Up /
Down
¡ TRACK
Press the or keys
SEEK
¡
on the control panel for less than
0.8 second. The next or previous
track will begin playing.
13