Warning Indicators; Starting The Programme; Child Lock; Auxiliary Functions - Beko DTBC 8001 A User Manual

* : Energy Label standard programme (EN
61121:2012)
All the values on the chart are identified
according to EN 61121:2012 standard.
Consumption values may vary from the
values in the chart depending on laundry
type, wringing speed, ambient conditions and
voltage levels.

5.5 Auxiliary functions

Audible warning
Drying machine makes an audible warning
when the programme is completed. If you don't
want it to make an audible warning, press the
"Buzzer" button. When you press the Buzzer
button, a light will illuminate and no audible
warning will be made when the programme
ends.
C
NOTE
• You can select this function before or
after the programme starts.
End time
If you prefer to dry your laundry at a later time,
you can delay start time of the programme up
to 3 hours, 6 hours or 9 hours using the Delay
function.
Open the loading door and place the laundry.
Select the drying programme.
Press the End Time selection button and
set the delay time you wish. When the End
Time button is pressed once, 3 hours delay is
selected and the delay indicator will light up.
If you press the same button again, 6 hours
delay will be selected and when you press for
the third time, 9 hours delay will be selected. If
you press the End Time button once again, the
delay will be cancelled.
After the End Time selection is made, start
delayed running for the programme selected
pressing the "Start/Stand-by" button.
C
NOTE
• You can add or remove laundry within
end time. At the end of the Time Delay
countdown, the Time Delay warning
indicator turns off and drying begins
Changing the end time
If you want to change the duration during the
countdown:
Cancel the programme by turning the On/
Off/Programme selection knob. Select the
programme you want and repeat the End Time
selection process.
Dryer / User Manual
Cancelling the end time function
If you want to cancel the end time countdown
and start the programme immediately:
Cancel the programme by turning the On/
Off/Programme selection knob. Select the
programme you want and press the Start/
Stand-by button.

5.6 Warning indicators

C
NOTE
• Warning indicators may vary depending
on the model of your dryer.
Filter cleaning
When the programme is completed, the
warning indicator for filter cleaning turns on.
Water tank
When the programme is completed, the
warning indicator to empty the water tank turns
on.
If the water tank fills up while the programme
continues, the warning indicator starts flashing
and the machine goes into stand-by. In this
case, empty the water tank and start the
programme by pressing the Start / Stand-
by button. Warning indicator turns off and
programme resumes.
Filter drawer /Heat exchanger cleaning
When the programme is finished, the cleaning
symbol of the heat exchanger or filter drawer
may light up.

5.7 Starting the programme

Press the Start/Stand-by button to start the
programme.
Drying indicator will light up, indicating that the
programme has started.

5.8 Child Lock

The drying machine has a child lock which
prevents the programme flow from being
interrupted when the buttons are pressed
during a programme. When the child lock
is activated, all buttons on the panel except
the On/Off/Programme selection knob are
deactivated.
Press the End Time and Buzzer buttons
simultaneously for 3 buttons to activate the
child lock.
The child lock has to be deactivated to be able
to start a new programme after the current
programme is finished or to be able to interfere
with the programme. To deactivate the child
lock, keep the same buttons pressed for 3
seconds.
13