Table of Contents
Advertisement
Figure 7: Pull back release lever
6.7
Footrest adjustment
To release the leg rest, pull the release latch (figure 9) away from the frame and rotate the leg rest
outward (figure 10). Now remove the leg rest from the frame of the chair. To adjust the height of the
leg rest you simply loosen the 4mm Allen bolts and slide the tube to your desired height. When this is
achieved tighten the bolts and refit leg rest to the frame of the chair. Repeat sequence for the other
leg rest as required.
Figure 9: Move footrest assembly
6.8
Height adjustable armrests
The wheelchair is fitted with height adjustable armrests which can be removed to enable side
transfers. To remove the armrest, lift the armrest up (figure 11) and then press the pin and the bottom
of the T-bar (figure 12) and lift gently to remove the armrest. To return the armrest to its normal
position line the T-bar up with the mounting block, press the pin at the bottom of the T-bar and gently
push down whilst releasing the pin. Now your armrest is now fitted back to its original position.
Issue: 3 / 310317
Figure 8: Lift leg rest up to remove
Figure 10: Flip up footrest
Page 15 of 22
Advertisement
Table of Contents
