Page 2
LE MAITRE LTD - ARCTIC SNOW MACHINE User Manual Introduction Thank you for choosing Le Maitre’s Arctic Snow Machine. Prior to use, we suggest that you read all the instructions provided, you can then look forward to it’s reliable and satisfactory performance.
Page 3
Contents ● Arctic Snow machine with power cable ● Volume remote controller ● Fluid tank ● Hanging bracket ● Screw set and user manual Arctic Snow external View 01. Housing 11. Indicator 02. Escape Nozzle 12. Control Outlet Socket (3-pin XLR for DMX) 03.
Page 4
Assemble 4 w ashers on both inner sides of the hanging bracket w ith M8 screw s on outer sides as indicated. ● Fill with Le Maitre Snow Fluid and replace cap. ● Firmly attach the 4-pin connector on the remote control cable to the proper input on the rear of the machine.
Page 5
● Always monitor tank fluid level during operation as running the snow machine without fluid can permanently damage the unit. If you experience low output, mechanical noise or no output at all, unplug immediately. Check the fluid level, the external fuse, remote connection and power from the wall.
Page 6
the channel value is increased the snow machine should produce snow at a steadily increasing rate. The unit is OFF when a value between 0-5 is selected. It will reach 100% output once the channel is set to 255. DMX protocol DMX value 6-255 Addressing...
Page 7
● We strongly recommend that you regularly clean the residue around snow machines vent holes (on both sides of the machine) with a soft brush. Technical Specifications Model Arctic Snow Machine Power Supply AC100/120/230/240V, 50-60Hz Motor 600W Output Volume...
Page 8
Le Maitre Ltd 6 Forval Close Wandle Way, Mitcham Surrey, CR4 4NE Tel: +44 206 646 2222 www.lemaitreltd.com...
Need help?
Do you have a question about the Arctic and is the answer not in the manual?
Questions and answers