Download Print this page
DBI SALA UCT-300 8513158 Operator's Manual

DBI SALA UCT-300 8513158 Operator's Manual

Confined space entry/retrieval systems

Advertisement

Quick Links

ADVANCED SYSTEMS
UCT-300 Tripod
Model Number(s):
A Capital Safety Company
8513158
MAN RATED
CONFINED SPACE
ENTRY/RETRIEVAL SYSTEMS
CSG UCT-300 TRIPOD
OPERATOR'S MANUAL
Form no: 8515531 rev: A
© Copyright 2011, DB Industries, Inc.

Advertisement

loading

Summary of Contents for DBI SALA UCT-300 8513158

  • Page 1 ADVANCED SYSTEMS UCT-300 Tripod Model Number(s): A Capital Safety Company 8513158 MAN RATED CONFINED SPACE ENTRY/RETRIEVAL SYSTEMS CSG UCT-300 TRIPOD OPERATOR’S MANUAL Form no: 8515531 rev: A © Copyright 2011, DB Industries, Inc.
  • Page 2 UCT-300 TRIPOD SETUP AND WINCH INSTALLATION INSTRUCTIONS A) Setting up the UCT-300 Tripod 1. Stand collapsed Tripod[1] on floor with feet down (See Fig. 1 ). 2. Remove leg retainer pins[2] from 3 places in tripod head (See Fig. 1 ). 3.
  • Page 3 UCT-300 TRIPOD SETUP & WINCH INSTALLATION INSTRUCTIONS B) Installing the Winch to UCT-300 Tripod Once tripod has been set up & leveled install the winch assembly as follows. 1. Select whichever tripod leg you wish to mount the winch on. This will be influenced by the location of the leg top pulley(s)[6], any accessories being used with the tripod, and any obstructions around the work area.
  • Page 4 UCT-300 TRIPOD SETUP & WINCH INSTALLATION INSTRUCTIONS B) Installing the Winch to UCT-300 Tripod (c'ont) 4. Remove cable retainer pin[13] from top pulley assembly[14] and route cable over pulley and thru head as shown ( See Fig. 6 ). 5. Repeat steps 1 thru 4 as required to install any other winches and / or fall arrest devices cable being used.
  • Page 5: General Specifications

    UCT-300 TRIPOD SETUP & WINCH INSTALLATION INSTRUCTIONS Model includes the following Item Description UCT-300 7ft. (2m) Tripod Accessories shown in gray but not included Digital 100 Winch Winch Mounting Bracket Top Pulley Ass'y DESCRIPTION The CSG Safety Systems UCT-300 Tripod combines the quality and user friendly performance of all CSG Safety equipment with the economy of the basic tripod.
  • Page 6 T-300/T-1000 TRIPOD SYSTEM SETUP AND WINCH INSTALLATION INSTRUCTIONS INSTALLATION OF WINCHES, SELF-RETRACTING LIFELINES ( SRL's), WORK POSITIONING AND FALL-ARREST DEVICES NOT MANUFACTURED BY CAPITAL SAFETY GROUP Your T-1000 TRIPOD SYSTEM can be used as a support structure for various types of safety devices. Some of these can mount directly to the anchor point at the top of the tripod head, while others may require an adapter bracket available from your dealer.
  • Page 7 T-300/T-1000 TRIPOD SYSTEM INSPECTION LOG BOOK MODEL # SERIAL # MFG. DATE HOIST INSPECTION LOG: (SAMPLE FORM - Copy to start inspection log book) TYPE OF INSPECTION: DAILY WEEKLY ANNUALLY Date of Inspection (d / m / y) Inspected By: LABELS DAMAGE CORROSION...
  • Page 8: Limited Lifetime Warranty

    LIMITED LIFETIME WARRANTY Warranty to End User: D B Industries, Inc., dba CAPITAL SAFETY USA (“CAPITAL SAFETY”) warrants to the original end user (“End User”) that its products are free from defects in materials and workmanship under normal use and service. This warranty extends for the lifetime of the product from the date the product is purchased by the End User, in new and unused condition, from a CAPITAL SAFETY authorized distributor.

This manual is also suitable for:

Uct-10008513159