Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for VivaLNK Vital Scout
Summary of Contents for VivaLNK Vital Scout
- Page 1 Continuous Wellness Monitor INSTRUCTIONS FOR USE...
-
Page 3: Table Of Contents
Contents What’s Included Intended Use & Precautions Instructions for Use Charging, Storage & Maintenance Troubleshooting Certification & Disclaimer Electromagnetic Compatibility (EMC) Tables Technical Specifications Definition of Symbols... -
Page 4: What's Included
What’s Included Adhesives Vital Scout Patch Charging Case USB Charging Cable... -
Page 5: Intended Use & Precautions
Intended Use and Precautions Intended Use Vital Scout is intended for general health and fitness monitoring for ages 18 years and older. It is not a medical device, and should not be used for medical purposes. Precautions 1. Any form of modification to this device is forbidden. - Page 6 11. In case of skin discomfort, remove the Vital Scout patch immediately. 15. For best results, the Vital Scout patch must be used with the provided adhesives. 12. User may only charge the patch via USB cable with the provided charger.
-
Page 7: Instructions For Use
Fully charge the patch before use 1. Download the App Download the free Vital Scout app by searching “Vital Scout” in the Apple App Store or Google Play Store. You must download the app in order to use the product. - Page 8 Instructions for Use - Applying the Patch 1. Prepare Skin 2. Peel adhesive starting 3. Place the patch on with tab #1 the adhesive Ideally, clean the left, upper Be sure to center and press middle chest area with an patch firmly onto the adhesive.
- Page 9 Instructions for Use - Applying the Patch 4. Peel adhesive using 5. Place the patch with 6. Carefully remove blue tab #2 adhesive side down onto left, plastic liner using tab #3 upper-middle chest area from the adhesive Tab #2 is located on the Press the patch firmly on chest After removing the blue plastic bottom side of the patch.
- Page 10 Instructions for Use - Removing and Cleaning the Patch 1. Remove the patch from 2. Remove the adhesive from 3. Clean the patch with chest by pulling from the the patch itself by peeling warm water outer edge of the from the edge adhesive Start at the outer edge of the...
- Page 11 Instructions for Use - Removing and Cleaning the Patch 4. Place the patch in the 5. Once charged, you can charger to recharge re-apply the patch; see instructions for “Applying the Patch” Align the two dots on the patch with the two pins on the charger to properly charge the patch.
- Page 12 Instructions for Use - Tips before Showering Note: While the patch is water resistant, avoid excessive exposure to water as it can affect the adhesive and sensors. 1. Avoid prolonged or hot showers 2. Avoid soap or rubbing around the patch 3.
-
Page 13: Charging, Storage & Maintenance
It is recommended to store the Vital Scout patch in the charging case when not in use for better •When the Vital Scout patch is placed inside the charger, red cleanliness. Charging will automatically start when light indicates the patch is charging. -
Page 14: Troubleshooting
1. Contact support@vivalnk.com 2. This device might not be worn correctly. 2. Recheck device’s location or contact with skin. 3. The Vital Scout patch has not been paired. 3. Pair the Vital Scout patch before wearing. 4. Improper or no skin preparation. -
Page 15: Certification & Disclaimer
1. Increase the separation between the Vital Scout patch and This device complies with Part 15 of the FCC Rules. Operation is phone. - Page 16 Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation. 1. To remove the battery, cut the Vital Scout patch. The battery is located in the center of the patch. This symbol on the product(s) and / or accompanying 2.
-
Page 17: Electromagnetic Compatibility (Emc) Tables
RF EMISSION Vital Scout used in aircraft shall meet the RF EMISSIONS requirements of ISO 7137. The conducted RF EMISSIONS test is also applicable to Vital Scout stored in charger connected to aircraft power. ISO 7137 is identical to RTCA DO-160C:1989 and EUROCAE ED- 14C:1989. - Page 18 IEC 61000-4-8 This test level assumes a minimum distance between the Vital Scout and power source with magnetic field of at least 15 cm. If the RISK ANALYSIS shows that the Vital Scout will be used closer than 15 cm to power source with magnetic field, the IMMUNITY TEST...
-
Page 19: Technical Specifications
Technical Specifications Product Name: Vital Scout Operating Conditions: Catalog/Model: VV310/VV-310 Temperature Range: 50° F - 104° F (10° C - 40° C) Patch Size: 90mm x 28mm Humidity Range: 15% - 85% Patch Thickness: 7.9 mm Pressure Range: 70 - 106 kPa Patch Weight: 7.5 g... -
Page 20: Definition Of Symbols
Definition of Symbols Polyethylene terephthalate FCC icon Manufacturer - window only WEEE icon Date of Manufacture Radio emission Consult Instructions Serial Number Keep Dry For Use Type-BF applied part Lot/batch Number Catalog Number Temperature Limit... - Page 21 THANK YOU FOR CHOOSING VITAL SCOUT Manufactured by VivaLnk, Inc. 51 East Campbell Ave #160 Campbell, CA 95008 USA (408) 868-2898...
Need help?
Do you have a question about the Vital Scout and is the answer not in the manual?
Questions and answers