Child Lock; My Cycle - Samsung DC68-02312A-04 Owner's Manual

CHILD LOCK

A function to prevent children from playing with your dryer.
SETTING/RELEASING
If you want to set or release Child Lock, press both the Time and Signal buttons at the same time
for 3 seconds.
How to Set:
1. It can be set while your dryer is running.
2. Once you set the Child Lock function, no button, except for the Power button, can be
controlled until you release the Child Lock function.
3. The Child Lock indicator will be lit.
Notice:
1. If the power is on again, the Child Lock function remains unchanged.
2. To release that function, follow the instructions above.
Notice:
When other buttons, except for the Power button, do not respond, check the Child Lock
indicator.

MY CYCLE

Lets you activate your customized cycle that includes Dry Level, Temp, Time option, etc.
By pushing the My Cycle button, you activate the settings used during the previous My Cycle mode.
(Default : Normal Cycle)
If My Cycle mode is activated, My Cycle lamp will be lit.
You can select all options in My Cycle mode as follows.
1. Select cycle using Cycle Selector dial.
2. After cycle selection, set each option.
Note: At this time, the option will follow as per each cycle's default option selection.
3. Then, you can start My Cycle by pushing the Start/Pause button in My Cycle mode. The cycle
and options you select will be displayed next time you choose My Cycle.
Note : You can change My Cycle setting by repeating same process above.
The last used setting will be displayed at next time you choose My Cycle.
Operating Instructions, Tips
SAMSUNG Dryer Owner's Instructions B-4