Samsung Z400 User Manual page 72

Note TeamDC numbers are also stored in your Contacts,
but they must be created online and sent to your
phone.
Saving a Direct Connect Number
1. Use your keypad to enter a Direct Connect
number.
The Direct Connect number may be the 10-digit
wireless phone number of the contact.
– or –
The Direct Connect number may be a unique
number made up of three sets of digits separated
by asterisks (for example, 444*5555*111). When
saving this type of number, always include the
asterisks ( ).
2.
Press (right softkey) >
Options
3.
Select or
New entry
56 Section 2B. Nextel Direct Connect
.
Save
and press
Existing entry
4.
Select a phone type for the entry and press
Select
Mobile + DC
and the Direct Connect number are the same.
Select
DC Only
different from the wireless phone number. Make
sure to include the "*" (
of a DC Only number.
Note
All Direct Connect users with Nextel or PowerSource
phones must ALWAYS use an "*" (
sets of digits, even if they are calling another user
whose DC number is the same as their wireless
phone number. Make sure to include the asterisks
when giving your number to a Nextel or
PowerSource user (for example, if your number is
555-555-1234, when giving it to a Nextel or
PowerSource user, it should be 555*555*1234).
5. Press
Done
.
Tip You can also save a Direct Connect number from
History. From a History listing, press Options > Save
Contact , and then complete steps 3–5 above.
if the wireless phone number
if the Direct Connect number is
) between the sections
(left softkey) to save the entry.
.
) between