Table of Contents
Advertisement
After you have completed the Train Mode, your phone
will be customized to your voice. Other people will not
be able to use your phone unless they reset it to factory
defaults.
Note
ONLY use the Train Mode if the system is frequently
misrecognizing your speech. You can always restore
the system to its original factory setting.
Training involves recording several number sequences
and common words to teach the system your voice.
This process takes about three minutes.
Tips for using the Train Mode:
Use the Adapt Voice feature in a quiet place.
Make sure you wait for the beep before starting to
speak.
Speak clearly, but say each digit sequence naturally.
To retrain the phone to use your voice:
1.
Press
Menu > Tools > Voice Service > Set
(left softkey)
> Train Mode
2.
Select
Adapt Voice
and press
sequence or word is displayed after selecting
Adapt Voice and pressing
3.
Hold the phone so that the microphone is
approximately six inches away from your mouth
and you can clearly read the onscreen number
sequences.
4.
Repeat either the digits or words shown onscreen
using a normal tone of voice.
If the phone cannot recognize your words, it will
continue to display the same information
onscreen.
5.
Repeat the previous step for the remaining sets of
digits or words.
6.
When you are finished with a full session, you will
reach a screen that reads, "Completed Training."
Press
(left softkey) to exit from the training
Set
session.
Section 2I. Voice Services
.
. (The number
.)
113
Advertisement
Table of Contents
