Advertisement
SETUP AND QUICK START
Quick Start
F Y I
4
The following section brießy describes how to start a data
conference using LiveShare Plus 4.0.
When you installed the PictureTel Drivers and Utilities
F.Y.I.
software for your PWB, the PWB whiteboard software was
installed as well. The applications appear in
.
> IFC
PictureTel strongly recommends that you do not use that
software for videoconferencing applications Ñ use the
LiveShare Plus 4.0 whiteboard instead.
To start a data conference and collaborate using LiveShare Plus, you
need to start the Live200 application and then make your video call.
Refer to the Release Bulletin and Live200 documentation for more
information.
To start a LiveShare Plus session:
1. Start the Live200 application.
LiveShare Plus starts automatically.
2. Dial the video call.
3. If the far end site has LiveShare Plus installed, you will see icons
for the near-end and far-end sites.
4. Once the video call connects and LiveShare Plus shows that you
are in a conference, click
The Share Application dialog box appears.
5. If you wish to share other applications, repeat step 4 for each
application.
6. Click
Plus whiteboard application.
on the LiveShare Plus toolbar.
on the LiveShare Plus toolbar to start the LiveShare
Start > Programs
Advertisement
