Summary of Contents for PictureTel Personal Whiteboard
Page 1
Personal Whiteboard Setup Guide and Quick Start...
Page 2
All other products and company names are the trademarks or registered trademarks of their respective owners. The information contained in this document is subject to change without notice. PictureTel assumes no responsibility for technical or editorial errors or omissions that may appear in this document or for the use of this material.
This guide tells you how to connect and conÞgure the PictureTel Personal Whiteboard (PWB) and gives some quick-start information to get you up and running. The Personal Whiteboard allows you to create and share a common workspace with your colleagues, both local and distant. By ¨...
¥ An SVGA monitor with 800 x 600 resolution and 256 colors ª A Live200 for Windows 95 videoconferencing system (VCS), version 1.5 or higher, with LiveShare Plus, version 4.0 or higher The PWB is also compatible with these Multipoint Control Units (MCUs): PictureTel Montageª version 6.0 PictureTel Prismª version 6.0...
Connecting the Hardware Connecting the The Þrst step in setting up your Personal Whiteboard is to connect it to your PC. Hardware To connect the PWB: 1. Connect the Personal Whiteboard 9-pin serial cable to COM 2 on your PC.
Page 6
The applications appear in Start > Programs > IFC PictureTel strongly recommends that you do not use that software for videoconferencing applications Ñ use the LiveShare Plus 4.0 whiteboard instead. To start a data conference and collaborate using LiveShare Plus, you need to start the Live200 application and then make your video call.