Table of Contents
Advertisement
4.
Use the Navigation Pad to enter the numeric passkey
and select Done (
Pairing is in progress.
5.
Use your phone's keypad to enter a new Device Name
for the device and press
6.
Highlight the device and select
(Connection Successful will be displayed if the device is
communicating properly.)
Note:
UpStage does not support Bluetooth headsets with MP4 files.
Waiting for Pairing
If you are going to be using a Dial-Up Network (DUN) profile
to pair with a PC or PDA, you will need to allow the other
device to initiate pairing with your phone.
To allow your phone to be paired with another Bluetooth device:
1.
Verify your headset/device is powered and is configured
for pairing. (This typically involves configuring your
headset/device to transmit a signal that it is searching
for a Bluetooth phone).
2.
Select Menu > Tools > Bluetooth > Trusted Devices.
3.
Highlight Add New and press
4.
Select Wait for request and press
5.
The visibility pop-up screen is displayed.
6.
Follow the onscreen prompts to enter your passkey and
select Done (
Section 2K: Using Bluetooth Wireless Technology
). You are then notified that
LS
LS
MENU
OK
).
LS
LS
to save and exit.
for Connect.
LS
LS
.
.
225
Advertisement
Table of Contents
