Samsung SPH A660 User Manual page 89

A660 BMC Manual.book Page 80 Tuesday, April 13, 2004 9:29 AM
•
When saying a number, speak at a normal speed and say each
digit clearly. There is no need to pause between digits.
•
The phone recognizes the digits one, two, three, four, five, six,
seven, eight, nine, zero, and oh. The phone does not recognize
numbers such as "one eight hundred" for "1-800." Instead, say
"one-eight-zero-zero."
•
The phone recognizes only valid 7, 10, or 11 digit North
American phone numbers.
•
If your phone does not usually recognize you correctly when
you are using Digit Dial, try adapting Digit Dial to your voice,
which can significantly improve accuracy for some speakers.
See the section "Adapting Digit Dial" for details.
To place a call using Digit Dial:
1. Activate voice recognition by pressing and holding
phone prompts you for a command.
2. Say Digit Dial. The phone prompts you to say the number.
3. Say a valid 7, 10 or 11 digit North American phone number
naturally and clearly.
Note:
If desired, you can say the number "1" before the number. This is
not required, the call is made both ways.
4. If the phone asks you, "Did You Say," followed by the correct
number, say "Yes." You can also select the correct number
from those displayed on the screen by pressing
correct number. The phone will then dial the number.
5. If the phone asks you, "Did You Say," followed by an
incorrect number, say "No." If there are other alternatives,
the phone will prompt you with the next one. You can also
press the navigation key up or down to select the correct
number from the Choice List, and then press
80 Voice Services
. The
on the
to dial.