Using One/Two/Three Touch Speed Dialing - Samsung SPH A660 User Manual

A660 BMC Manual.book Page 14 Tuesday, April 13, 2004 9:29 AM

Using One/Two/Three Touch Speed Dialing

With this feature, you can automatically call Speed Dial entries using
one key press for locations 1-9, two key presses for locations 10-99,
or three key presses for locations 100-300.
To use One-Touch Dialing for Speed Dial locations 1-9:
Press and hold the appropriate key for a few seconds. The
display confirms that the number has been dialed when it
shows "Calling".
To use Two-Touch Dialing for Speed Dial locations 10-99:
1. Press the first digit.
2. Press and hold the second digit for a few seconds. The
display confirms that the number has been dialed when it
shows "Calling".
To use Three-Touch Dialing for Speed Dial locations 100-300:
1. Press the first digit.
2. Press the second digit.
3. Press and hold the third digit for a few seconds. The display
confirms that the number has been dialed when it shows
"Calling".
Note:
Your phone also supports 1- 4 digit dialing. If you enter a number
using the keypad without holding the last number and then press
your phone will dial those digits. (For example, if you enter
and press
location 211.
14 Getting Started
, it dials 211, not the number stored in memory
,