Table of Contents
Advertisement
Beaming Information
The Beaming function allows you to send or receive information via
the Infrared (IR) port located on the top of the phone. The IR port is
covered with a protected cover to prevent damage. When beaming
information between two IR devices, hold them 3-4 inches apart
with the two IR ports facing each other.
To configure your phone to send or receive information via IR:
1.
Press
2.
Highlight Settings and press
3.
Highlight More and press
4.
Highlight Beam and press
5.
Press
beams checkbox.
6.
Press
Beaming a Contact
Beaming allows you to send an entry saved in contacts to another IR
enabled device.
To beam a contact:
1.
Press
2.
Highlight Contacts and press
3.
Press
4.
Press
5.
Align the two devices so that the IR windows are facing
each other.
6.
Follow the on-screen prompts to complete the transfer.
Section 2J: Using Your Smartphone
for Start.
to place a check mark or clear the Receive incoming
to save and exit.
for Start.
up or down to highlight the desired contact.
for Beam Contact.
.
.
.
.
98
Advertisement
Table of Contents
