Editing A Contacts Entry - Samsung Spex SCH-r210 Series User Manual

Enter a phone number or E-Mail address in the highlighted
4.
field.
Repeat steps 3 and 4 as needed.
5.
6. Press to save the new entry.

Editing a Contacts Entry

Editing Contacts Name and Numbers
Find the Contacts entry you wish to change. (For more
1.
information, refer to "Finding a Contacts Entry" on
page 28.)
2. Use the Navigation key to highlight the entry and press
VIEW. The View Contact screen appears in the display
showing the highlighted entry's information.
Use the Navigation key to review the information for the
3.
entry that you wish to change, then press EDIT. The Edit
Contact screen appears in the display.
Use the Navigation key to highlight the particular
4.
information you want to add or change.
• Press to backspace and delete numbers or letters.
• Press and hold to clear all numbers or letters in the highlighted
field.
31
• Press Options. The following options pop-up in the display:
– Set Speed Dial / Remove Speed Dial — Assign/remove a speed dial
number. (For more information, refer to "Speed Dial" on page 35.)
– Set as default — Set the number the phone will dial when Contacts
dialing or speed dialing.
– Wait — A hard pause (waits for input from you).
– 2-Sec Pause — A 2-second pause after which dialing resumes. (For
more information, refer to "Add Pauses to Contacts Numbers"
on page 31.)
Use the Up/Down navigation keys to highlight the desired option,
then press .
When you're finished changing the contents of a field,
5.
press . Your changes are saved and a confirmation
message appears in the display.
Add Pauses to Contacts Numbers
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
Wait — Stops the calling sequence until the phone receives further
•
input.
2-Sec Pause — Stops the calling sequence for two seconds, then
•
sends the remaining digits.