Jet Cool Operation; Forced Operation - LG S05ICEX Owner's Manual

Operating Instructions

Jet Cool Operation

You can activate this operation by pressing the JET COOL BUTTON.
To change from jet cool mode to high fan speed cooling mode, press the JET COOL BUTTON or
INIDOOR FAN SPEED SELECTOR BUTTON or the ROOM TERPERATURE SETTING BUTTON again.
NOTE
• Jet Cool operation cannot be activated during Air Circulation operation and auto changeover operation.
• Each time the JET COOL is pressed, the operation mode is shifted in the direction of the arrow.
- Cooling
Jet cool cooling

Forced operation

Forced operation is used when the remote controller can't be used. The operation will be started if the ON/OFF
button is pressed. If you want to stop the operation, re-press the button.
O p r e i t a g n m o e d
Indoor FAN Speed
Setting Temperature
Test operation
During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room temperature
and resets in 18 minutes. During test operation, if remote controller signal is received, the unit operates as remote controller
sets. If you want to use this operation, Press and hold the ON/OFF button for 3~5 seconds, then the buzzer sound 1
'beep'. If you want to stop the operation, re-press the button.
16 Air Conditioner
Jet cool function can be used to cool the room quickly in hot summer. When this
function is turned on, the air conditioner runs in cooling operation mode with super
high fan speed and 18 °C setting temperature for 30 minutes for fast and e ective
cooling.
Similarly, jet heat function (available only in some models) warms up the room quickly
by operating at super high fan speed and 30 °C setting temperature for 30 minutes.
Rational type
Cooling Model
C o i l o g n
High
22°C