Air Circulation Operation; Auto Clean Operation - LG S05ICEX Owner's Manual

Operating Instructions

Air Circulation Operation

Auto Clean Operation

During Auto Clean Operation, moistures left in indoor units after cooling operation or healthy
dehumidification operation can be removed.
PURIFIER Operation
PURIFIER operation can be started by pressing the PURIFIER BUTTON on the
remote controller.
Repressing it will deactivate the operation.
NOTE
• This features can be used in any operation mode and fan speed by pressing the PURIFIER button.
• Separate PURIFIER operation is possible in stop condition. It is cancelled by pressing PURIFIER
button or on/off button.
12 Air Conditioner
This operation circulates the air without cooling or heating. It can be
activated by pressing the OPERATION MODE SELECTION
BUTTON. Once the air circulation is activated you can select the fan
speed by pressing the INDOOR FAN SPEED SELECTION BUTTON.
NOTE
: During this operation , 'Operating' lamp lights up.
Select Auto Clean Operation by the function setting button(
Now whenever the unit is turned off, the indoor fan is still running
for about 30 minutes internally without cooling or dehumidification
operation. This function dries up any remains of moisture & cleans
the unit internally. If you push the Auto Clean button again, this
function is cancelled.
NOTE
During Auto Clean fuction, only ON/OFF button, PURIFIER button, Auto Clean
button is used. During this operation, 'Co' lamp lights up.
The PURIFIER system is a technology developed by LG to get rid of microscopic
contaminants in the intake air by generating the plasma or Ionizer of high
charge electrons. This plasma or Ionizer kills and destroys the contaminants
completely to provide clean and hygienic air.
NOTE
During this operation, 'PURIFIER' and 'operating' lamp lights up.
MODE
) .
PURIFIER