Advertisement
ALARM MODE
Mode indicator Voice alarm
You can set an alarm with hour, minutes, month, and date.
on indicator
When the alarm is on, the alarm sounds at the preset time.
Month – Date
Press any button to stop the alarm after it starts to sound.
When the hourly time signal is on, the watch beeps every
A
B
hour on the hour.
1 2 3 4 5
• You can use voice memory contents as your alarm sound.
C
D
Alarm Types
The types of alarm you get depends on the information you
E
F
set.
Alarm on
indicator
Hour : Minutes
Hourly time signal on indicator
• To set a Daily Alarm
Set the hour and minutes for the alarm time. Set
(see step 3 under "To set an alarm"). This type of setting causes the alarm to sound
every day at the time you set.
• To set a Date Alarm
Set the month, date, hour and minutes for the alarm time. This type of setting causes the
alarm to sound at the specific time, on the specific date you set.
• To set a 1-Month Alarm
Set the month, hour and minutes for the alarm time. Set
under "To set an alarm"). This type of setting causes the alarm to sound every day at the
time you set, only during the month you set.
• To set a Monthly Alarm
Set the date, hour and minutes for the alarm time. Set
"To set an alarm"). This type of setting causes the alarm to sound every month at the
time you set, on the date you set.
To set an alarm
1. Hold down A while in the Alarm Mode until the hour digits start to flash on the display.
The hour digits flash because they are selected .
• At this time, the alarm is automatically turned on.
2. Press C to change the selection in the following sequence.
Hour
Minutes
3. Press D to increase the selected digits. Holding down D changes the selection at
high speed.
• To set an alarm that does not include a month (daily alarm, monthly alarm), set
the month. Press D until the
mark appears (between 12 and 1) while the month
x
digits are flashing.
• To set an alarm that does not include date (daily alarm, 1-month alarm), set
date. Press D until the
xx
mark appears (between 31 and 1) while the date digits are
flashing.
• The format (12-hour and 24-hour) of the alarm time matches the format you select for
normal timekeeping.
• When setting the alarm time using the 12-hour format, take care to set the time cor-
rectly as morning (no indicator) or afternoon P.
4. After you set the alarm, press A to return to the Alarm Mode.
To turn an Alarm and hourly time signal on and off
Press B while in the Alarm Mode to change the status of the Alarm and Hourly Time
Signal in the following sequence.
Off
Standard
Hourly Time
Alarm On
Signal On
• The standard alarm on indicator, voice alarm on indicator, and the hourly time signal
on indicator are shown on the display in all modes while these functions are turned on.
• Any function whose indicator is not shown on the display is turned off.
• Turning on the voice alarm causes the contents of voice memory to be used as the
alarm sound.
To test the alarm
Hold down B while in the Alarm Mode to sound the alarm.
Voice Alarm Precautions
• To use the voice alarm, record a message, set the alarm, and turn on the voice alarm.
• You should use the voice memory of this watch either as a voice memo or as voice
alarm contents. The watch automatically use the standard beeper alarm whenever
there is nothing stored in voice memory. Deleting voice memory contents while the
voice alarm is turned on automatically switches to the standard beeper alarm.
• When the voice alarm is turned on, all voice memory contents are played back in
sequence, starting from the lowest numbered (oldest) voice memory area.
• When an alarm time is reached while the voice alarm is turned on, the standard beeper
alarm sounds for about one second and then voice memory contents are played.
• The alarm operation (standard beeper alarm followed by voice memory contents) plays
all voice memory contents only once. This means the shortest possible alarm opera-
tion is two seconds long, while the longest possible operation is 30 seconds long.
x
for the month and
xx
for the date
for the date (see step 3
xx
x
for the month (see step 3 under
Month
Date
xx
for the
Voice Alarm
Standard
Voice
Alarm and
Alarm On
and Hourly
Hourly Time
Time Signal
On
Signal On
Mode indicator
A
1 2 3 4 5
C
E
F
Hours
Seconds
Minutes
3. Press D to increase the selected number. Holding down D changes the selection at
high speed.
• To set the starting value of the countdown time to 24 hours, set
4. After you set the countdown start time, press A to return to the Countdown Alarm
Mode.
To use the countdown timer
1. Press F while in the Countdown Alarm Mode to start the countdown timer.
2. Press F again to stop the countdown timer.
• You can continue countdown timer operation by pressing F.
3. Stop the timer and then press E to reset the countdown time to its starting value.
• When the end of the countdown is reached and auto repeat timing is off, the alarm
sounds for 10 seconds or until you stop the alarm by pressing any button. Countdown
timing stops, and the countdown time is automatically reset to its starting value after
the alarm stops.
To switch auto repeat timing on and off
Auto repeat on indicator
A
1 2 3 4 5
AUTO
C
E
F
x
for
1/100 second
Mode indicator
A
1 2 3 4 5
C
E
F
Hours
Seconds
Minutes
Important!
Keep the watch about 5cm (2 inches) from
your mouth when recording!
COUNTDOWN ALARM MODE
The countdown timer can be set within a range of 1 minute
to 24 hours. When the countdown reaches zero, an alarm
sounds for 10 seconds or until you press any button.
B
Note that you can also select auto repeat timing that auto-
matically restarts the countdown from the original value you
set whenever zero is reached. This continues until you manu-
D
ally stop the countdown.
To set the countdown start time
1. Hold down A while in the Countdown Alarm Mode until
the hours digit starts to flash on the display. The hours
digit flashes because it is selected .
2. Press C to change the selection in the following se-
quence.
Hours
While in the Countdown Alarm Mode, press D to switch
auto repeat on and off.
• When the end of the countdown is reached while auto
B
repeat is on, the alarm sounds, but the countdown restarts
from the beginning without stopping. You can stop the
countdown by pressing F and manually reset to the start
time by pressing E.
D
STOPWATCH MODE
The Stopwatch Mode lets you measure elapsed time, split
times, and two finishes. The range of the stopwatch is 23
hours, 59 minutes, 59.99 seconds.
(a) Elapsed time measurement
B
F
F
F
J
J
Start
Stop
Re-start
(b) Split time measurement
D
F
E
E
J
J
Start
Split
Split release
(c) Split time and 1st-2nd place times
F
E
F
J
J
Start
Split
Stop
First runner
Second runner
finishes.
finishes. Record
time of first runner.
1589-2
Minutes
0:00
.
F
E
J
J
Stop
Clear
F
E
J
J
Stop
Clear
E
E
J
J
Split release Clear
Record time of
second runner.
Advertisement
