Care And Cleaning; Gas Surface Burner; Removing And Replacing; Burner Heads/Caps - LG LRG3085ST Owner's Manual

CARE AND CLEANING 3]
CARE AND CLEANING
Gas Surface Burner
CAUTION
NOT clean this appliance with bleach.
To prevent burns, wait until the cooktop has cooled down before touching any of its parts.
Removing and Replacing fhe Gas Surface Burner
Grates and burner caps/heads can be removed for care and cleaning.
side grate center grate side grate
_!!_] rif-_ Oval burner
--L J head and
cap
"f_'_ _ _'1_ dL-b Small burner
Medium burner
head and cap _ _ head and cap
i _ I >-\
Large burner 0 _L__.___ __.}___- 0 Extra large burner
............ o.._# ..................
head and cap _'_ head and cap
LRG3085 / LRG3083
side grate center grate side grate
_ _-:;_ _ Med,umburner
Z _ head and cap
Medium burner _[_ _
and
cap
[_?/:_:;::_i _ head and cap
head _ .............. -_ ...... O Small burner
Large burner <--_j
/ tl
0 Extra large burner
-: _ head and cap
head and cap _ [{L_ .
LRG3081
i
' General burner
Burner
cap is
properly
set
F
Burner cap is NOT
properly set
Burner Heads/Caps
For even and unhampered flame, the slits in the burner heads must be kept clean at all times. The burner heads and caps (and
the oval burner head and cap assembly) can be lifted off. Do not attempt to remove the oval burner cap.
Wash the burner bases and caps in hot soapy water and rinse with clean water. Run water through the oval burner from the
bottom stem to flush out debris.
Any spills on or around an electrode must be carefully cleaned.
To remove burnt-on food, soak the burner heads in a solution of mild liquid detergent and hot water for 20-30 minutes.
For stubborn stains, use a toothbrush or wire brush.
The burners will not operate properly if the burner ports or electrodes are clogged or dirty. Use a wire brush or pipe cleaner
to unclog ports on the oval burner.
Burner caps and heads should be cleaned routinely, especially after bad spillovers.
Burners will not light if the cap is removed.