Advertisement
Eng.
What's In The Box
M100 Media Player
Micro USB Cable
USB Power Adapter
Remote Control
Remote Control IR Receiver
Installation Guide
Installation
1. For power, connect the micro USB cable to the M100.
2. Connect the other end of the micro USB cable to the TV's USB port or to
the USB power adapter and plug the adapter into outlet.
3. Connect the M100 dongle to your TV's HDMI port.
4. Connect the remote control receiver to USB port (a USB hub can be used
if connecting the receiver with external storage devices).
5. Select the correct TV input source for your TV via TV's remote control.
6. M100's initial wizard will display on your TV.
7. Use the remote control to control the M100.
* The remote is IR based (Infrared), thus, the remote will need to be pointed towards the
receiver in order to function properly.
Initial Wizard
Language
1. Select your desired language, then select Next to go to the next step.
Display Mode
1. Select a display mode compatible with your TV (720p@60Hz is set by
default), then select Next to go to the next step.
Wi-Fi Network
1. Select your own listed Wi-Fi network. Enter the password if applicable.
2. If successfully connected, a check symbol will appear to the left of your
Wi-Fi network name.
3. You are now connected to Wi-Fi. Select Next to go to the next step.
* The M100 will auto memorize the last Wi-Fi connection. If using a new
Wi-Fi connection, you will need to reconnect the M100.
Advertisement
Table of Contents
Related Manuals for Meeboss M100
Summary of Contents for Meeboss M100
- Page 1 Wi-Fi network name. 3. You are now connected to Wi-Fi. Select Next to go to the next step. * The M100 will auto memorize the last Wi-Fi connection. If using a new Wi-Fi connection, you will need to reconnect the M100.
- Page 2 Miracast Mirroring * Miracast requires Android 4.2 or higher. 1. Press Fn on the remote to access Miracast. The M100 is now ready to pair. 2. On your mobile device, scan for available devices through the Miracast wireless display function (check your device’s user manual).
- Page 3 Laggy screen and crackling sounds? -It is recommended to have an internet speed of at least 8 Mbps and to have the M100 close to the wireless router to receive a stronger Wi-Fi signal. No display on screen after connecting a USB flash drive or external hard drive to the USB port? -Recommend using a powered USB hub.
Need help?
Do you have a question about the M100 and is the answer not in the manual?
Questions and answers