Table of Contents
Advertisement
your phone. You will notice that your information was copied to
the phone.
Customizing Connection Settings
To establish a connection between your computer and the phone,
you must enable the connections you want to use in the
ActiveSync program. By default, all connections are enabled.
From the ActiveSync window on your computer, select
1.
➔
File
Connection Settings...
Change the connection settings.
2.
Note: If your phone is not connected to the computer, click this button to
establish a connection.
If your phone is not
connected to the
computer, click this
button to establish a
connection.
Click the OK button.
3.
Connecting Your Phone to a Computer
To connect the phone to your computer, you can choose one of
the following ways:
Using a PC data cable
•
Using a Bluetooth connection
•
Connecting with a PC data cable
Connect one end of the PC data cable (included with the i637
handset) to the jack on the right side of the phone and the other
end to the USB port on your computer.
Note: USB mode of your phone must be set for Microsoft ActiveSync. Select
Start ➔ More ➔ More➔ Settings ➔ Connections ➔ USB
the mode to ActiveSync.
The connection is established and the Microsoft ActiveSync
window displays. The synchronization automatically begins.
Tip: When an error occurs in a USB connection, activate the DHCP Client
service, or deactivate the firewall or VPN environment.
USB hubs and laptop docking stations have not exhibited consistent
®
stability with Windows
Mobile powered devices and ActiveSync.
You can connect the device to the PC USB ports if you experience
connection drops or inability to connect through a USB hub or docking
station.
. Then change
Synchronization
31
Advertisement
Table of Contents
