Infrared Dynamics Sunpak S34-TSH Supplementary Instructions

Two stage hardwired

Advertisement

Quick Links

Sunpak Infrared Heater
Supplementary Instructions
These instructions are designed to be used in conjunction with
Sunpak Installation, Operation & Maintenance Manual (P/N 65132).
Should you have any questions regarding these instructions or need a
copy of the Sunpak Manual, please contact the factory.
Installer – Please take the time to read and understand these instructions as well as
the Sunpak Installation manual P/N 65132. Copies of these instructions are available
on our website or from the manufacturer. Installer must give a copy of this manual to
the owner.
Owner – Keep this manual in a safe place in order to provide your serviceman with
necessary information.
-Two Stage Hardwired
for
Infrared Dynamics, Inc
3830 Prospect Avenue
Yorba Linda, CA 92886
Tel: (888) 317-5255
www. Infradyne.com
P/N 65135-9/13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sunpak S34-TSH and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Infrared Dynamics Sunpak S34-TSH

  • Page 1 Sunpak Installation, Operation & Maintenance Manual (P/N 65132). Should you have any questions regarding these instructions or need a copy of the Sunpak Manual, please contact the factory. Infrared Dynamics, Inc 3830 Prospect Avenue Yorba Linda, CA 92886 Tel: (888) 317-5255 www.
  • Page 2 The Sunpak S34-TSH two stage heaters are easily controlled using a duplex switch such as the Leviton switch No. 5634. The switch must be wired according to our diagram to work properly. A 24 VAC Class 2 transformer is required to supply electrical to heater.
  • Page 3 Sunpak Infrared Heater Model S34-TSH S34-TSH Wiring It is important that the S34-TSH heater be wired properly to get full function of the heater and to avoid damage to the unit. HI / LO Control Wiring There are three wires coming out of the heater. The green wire is the ground wire. If one transformer is used for multiple heaters it is important that the ground wire for each heater is connected to the same side of the transformer.
  • Page 4 Sunpak Infrared Heater Model S34-TSH...

Table of Contents