Introduction; Notes On Installation - Power Acoustik DVALT Drive alert User Manual

I.Introduction
Thank you for purchasing this advanced camcorder. This
camcorder is specically designed for real time video and
audio recording when driving.
II.Notes on Installation
1. Do NOT setup the camcorder while driving or while the
vehicle is in motion.Please stop at a safe place before adjusting
or installing.
2. This camcorder should be installed in a proper manner,
without interfering with the driver's eyesight or Driver's
eyesight,airbags or any other safety restraint system.
Install the camcorder above the rear-view mirror to obtain the
best open-eld view. Do NOT install the camcorder in a location
that will obstruct your required driving view.
3. Make sure that the lens is within the wiping range of the
windscreen wiper to ensure a clear view even when it rains.
4. Do not touch the lens with your ngers. Finger grease may be
left on the lens and will result in unclear videos or snapshots.
Clean the lens on a regular basis.
5. Keep the product away from strong magnetic elds, which
may cause damage to this product.
6. During formatting and use, do not disconnect the power
supply, or insert/remove the TF card, otherwise it is likely to
damage the TF card or cause program error.
7. TF card in this product is not intended to store any other les.
Before it is used, format the TF card, and promptly back up
important videos and images.
8. To prevent electric shock, do not insert or remove the power
plug with wet hands.
5