Samsung SGH-E600C User Manual page 82

Network Services
Security: select a data transmission mode.
Choose Secure to protect your data against
unauthorised access; otherwise, choose Non-
Secure.
Bearer: select a bearer to be used for each type
of network address accessed; GPRS or Data.
The remaining options depend on the Bearer
setting.
When the bearer is set to GPRS:
IP Address: enter the WAP gateway address
required to connect to the Internet.
User Name: enter the User ID required to
connect to the GPRS network.
Password: enter the password required to
connect to the GPRS network.
APN: enter the access point name used for the
address of the GPRS network gateway.
When the bearer is set to Data:
IP Address: enter the WAP gateway address
required to connect to the Internet.
Login Name: enter the PPP server login ID.
Password: enter the PPP server password.
Dial-up Number: enter the PPP server phone
number.
Data Call Type: select a data call type;
Analogue or ISDN.
Note: The WAP browser settings may vary,
depending on the service provider. Contact
your service provider for further details.
162
Clear Cache
(Menu 9.1.5)
You can clear the information stored in the
cache, the phone's temporary memory which
stores the most recently accessed Web pages.
Press the Yes soft key to confirm the deletion.
Otherwise, press the No soft key.
Push Message
(Menu 9.1.6)
In this menu, you can receive and access web
messages from the server.
The following options are available:
Inbox: allows you to read the messages
received from the web server.
Receive: allows you to set whether or not your
phone receives web messages.
Delete All: allows you to delete all of the web
messages.
Funbox
163