Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for XpressFill XF4500
Summary of Contents for XpressFill XF4500
- Page 1 XpressFill XF4500 Counter Pressure Filler Operating Instructions...
-
Page 2: Important Safety Instructions
fi ller covered in this manual unless you are certain the electrical supply has been correctly installed and the bottle fi ller has been properly grounded. 265 Prado Road, Suite 1 • San Luis Obispo, CA 93401 • Tel: (805) 541-0100 • sales@xpressfill.com... -
Page 3: Safety Warnings
XPRESSFILL Systems LLC Safety Warnings... - Page 4 fi rst consulting XpressFill Systems LLC. 265 Prado Road, Suite 1 • San Luis Obispo, CA 93401 • Tel: (805) 541-0100 • sales@xpressfill.com...
- Page 5 Bottle Pressure 2. Bottle pressure Adjustment adjustment knob Start Fill 3. Fill toggle Stop Fill switch Bottle Release 4. Pressure release Pressure Release knob 265 Prado Road, Suite 1 • San Luis Obispo, CA 93401 • Tel: (805) 541-0100 • sales@xpressfill.com...
- Page 6 Once the fill is complete, set the Fill Toggle Switch to the “Stop Fill” position and pull the Pressure Release Knob to release the pressure in the bottle. 265 Prado Road, Suite 1 • San Luis Obispo, CA 93401 • Tel: (805) 541-0100 • sales@xpressfill.com...
- Page 7 265 Prado Road, Suite 1 • San Luis Obispo, CA 93401 • Tel: (805) 541-0100 • sales@xpressfill.com...
-
Page 8: Operating Procedures
Bottle position (the green fill light will go off). Once you are sure the filler is powering up properly, turn off the power switch on the right side. 265 Prado Road, Suite 1 • San Luis Obispo, CA 93401 • Tel: (805) 541-0100 • sales@xpressfill.com... - Page 9 You have now filled your first bottles plugged in correctly, you can open the valves using the XF4500 Filling System. on your tanks and turn on the air compressor. 265 Prado Road, Suite 1 • San Luis Obispo, CA 93401 • Tel: (805) 541-0100 • sales@xpressfill.com...
- Page 10 The inlet pressures can also be adjusted in conjunction with bottle pressures to change the filling rate and foaming characteristics. 265 Prado Road, Suite 1 • San Luis Obispo, CA 93401 • Tel: (805) 541-0100 • sales@xpressfill.com...
-
Page 11: Troubleshooting
XPRESSFILL Systems LLC Trouble Shooting If at any time you have issues with the setup or adjustment of your XF4500 bottle fi lling machine, or any other questions about fi lling your product, please contact us at the number listed at the front of this manual. - Page 12 After sanitizing, fl ush your fi ller with 2 gallons of warm water. Before storing your XpressFill fi ller, make sure you get all water out of the fl ow path. Allow to run until pressurized keg with cleaning solution is empty and runs dry, blowing the remaining water out of the fi...
- Page 13 XF4500 Cleaning Configuration Part One Attach cleaning hoses as pictured above. Tubing and connectors are supplied in the power cord bag. 1. Flip the Fill/Flush switches to flush mode (Rocker switches located left of machine). 2. Place bottles under spouts.
- Page 14 XF4500 Cleaning Configuration Part Two Attach cleaning hoses as pictured above. Tubing and connectors are supplied in the power cord bag. 1. Turn on main power switch with bottles in place. (Green switch located right side) 2. Push in to close quick release knobs.
-
Page 15: Additional Information
2. Removal requires using the included tool to firmly push the collet and remove the tube. Push the collet in to remove tubing 265 Prado Road, Suite 1 • San Luis Obispo, CA 93401 • Tel: (805) 541-0100 • sales@xpressfill.com...
Need help?
Do you have a question about the XF4500 and is the answer not in the manual?
Questions and answers