Advertisement
1.5. Main features
1. Conforms to IEEE802.3Z/AB 100 Base-T/SX/LX standard
2. Back pressure flow control for full duplex IEEE802.3 X and half duplex.
3. Automatic identification of MDI/MDI-X cross line.
4. Conforms to safety code of FCC and 15 CLASS A, CE.
1.6. Technical parameters
(1) Standard Protocol: IEEE802.3Z/AB 1000Base-T/SX/LX standard
(2) Transfer rate: electric interface: 10/100Mbps
Optical interface: 125 Mbps
(3) Connectors: TX: UTP RJ-45 connector
FX: SFP Slot
(4) Operation mode: full duplex mode or half duplex mode
(5) Power supply parameter:
External: 110-265V AC 48VDC
Internal: 5V DC 2A
(6) Operating temperature: -10~55
(7) Relative humidity: 5%-90%
(8) Twisted Pair cable: Cat5 UTP cable
(9) Fiber cable:
Multi-mode: 50/125, 62.5/125
Single mode: 8.3/125, 8.7/125, 9/125 or 10/125μm
(10) Outside dimensions:
125mm (W) * 83mm (D) * 26 mm (H) (Internal power supply)
2. Warning
1. This product is suitable for indoor application.
2. Place the dust cover on the fiber interface when not in use.
3. It is dangerous to stare at the fiber transmitter with the naked eye.
4. Optical fiber transceivers must be used in pair.
5. Single optical fiber transceiver must be used in pair(A,B)
A: TX1310RX1550nm B: TX1550/RX1310nm.
3. Trouble shooting
1. Device is not connecting. Please check that the corresponding network
device is using the same transfer rate as the media converter (10Mbps,
100Mbps or 1000Mbps).
XTR202-SFP
Advertisement
