Table of Contents
Advertisement
Caution!: The WAPs are pre-configured and can not be altered using this
screen. If you change the settings without first checking with your
service provider, the web browser, MMS, and e-mail features may
not work properly.
To create a new connection profile, touch
3.
the onscreen prompts.
– or –
To edit an existing profile, touch a profile from list, scroll to
the desired field, and use the onscreen keypad/keyboard to
edit the parameter you want to edit:
• Set Name: enter a profile name.
• Access Name: edit the access point name.
• Auth Type: select the type of authentication used for this WAP
connection: Normal, Secure, or None.
• User ID: enter the User ID required to connect to the network.
• Password: enter the user password required to connect to the
network.
• Protocol: set the connection protocol used by the WAP browser:
HTTP or WAP.
• Home URL: enter the URL address of the page to be used as
your homepage.
91
and follow
Create
4.
The WAP settings may vary depending on the service provider.
• Proxy Address: (HTTP only) set the proxy server address and
port.
• Gateway Address: (WAP only) enter the gateway address of the
proxy server.
• Secure Connection: (WAP only) enter secure connection
information.
• Linger Time (sec.): set a time period (in seconds) after which the
network is disconnected if there has been no new data traffic in
that time.
• Advanced Settings: (touch
the IP-specific information: Static IP, Static DNS, Server
information, and Traffic Class.
– Static IP: specify if you want to manually enter an IP address. If you
want the IP address to be automatically assigned by the server,
remove the check mark.
– Local Phone IP: enter the IP address obtained from the network
operator, if you checked the Static IP option.
– Static DNS: specify if you want to manually enter the Domain Name
Server (DNS) address. If you want the address to be automatically
assigned by the server, remove the check mark.
– Server 1/Server 2: enter the Domain Name Server (DNS) addresses.
– Traffic Class: select the traffic class.
Touch
to save these settings.
Save
) allows you to configure some of
Advertisement
Table of Contents
