Samsung SGHA877 User Manual page 41

In-Call Options
During an active call there are several functions available by
touching a corresponding onscreen button.
• Spkr On/Off routes the phone's audio through either the speaker or
through the earpiece.
– Slide Speaker to On to route the audio through the speaker. (You can
adjust the speaker volume using the volume keys.)
– Slide Speaker to Off to use the phone's earpiece.
Mute/Unmute turn the onboard microphone either on or off.
•
– Touch Mute during a call to mute the microphone.
– Touch Unmute to unmute the microphone.
Video Share lets you share video during an active call. For more
•
information, refer to "Video Share" on page 31.
Dial to display the onscreen keypad, where you can choose to Save
•
the entered number to your Address Book, Send a new text message,
or initiate a new call.
Hold to place the current active call on hold.
•
More to access additional in-call options such as:
•
– Address Book to display your current Address Book entries.
– Save to Address Book to store the current phone number into your
Address Book.
– View Address Book Details to view the detail information for the
current Address Book entry. This function is only available when the
number was previously entered into the Address Book.
– Send Message to send a new text message.
– Memo to create a new memo during the active call.
Placing a Call on Hold
You can place the current call on hold at any point during a
conversation. You can also make another call while you have a
call in progress if your network supports this service.
While on a call, touch Hold. This action places the current
1.
caller on hold (which is displayed onscreen as a
greyed-out box).
You can later reactivate this call by touching Resume.
2.
To making a new call while you have a call in progress:
1. While on a call, touch Hold.
➔
More
Touch Address Book to look up a number in the
2.
Address Book.
Press to dial the second number.
3.
- or -
➔
Dial
New Call
Touch
displayed within either an In call or On hold tab.
Note: The caller currently on hold appears within the On Hold tab.
. Once connected, each call is
Call Functions 37